Labelling Machines

Aztro models C Wrap & D Wrap Labelling Machines

Built from stainless steel to Australian high standards, these machines are available as left or right hand models. The label head can apply a label to three (3) sides (C Wrap) or four (4) sides (D Wrap) of rectangular or square shaped food trays. The speed of the labelling machine can be adjusted to match production line speeds.

The user-friendly 4 way hand wheel adjustment on the labelling head ensures that the label position can be precisely and accurately positioned on the container. The state-of-the-art labelling head with a servo motor ensures accurate and consistent label positioning. Most trays and labels can be managed without change parts.

All machine controls and settings are set with intuitive touch screen control, centrally mounted on the machine. The Aztro C Wrap and D Wrap range of labelling machines have PLC control, can be fitted with a range of options to include printing, product inspection and reject modules.


  • Touch screen control
  • Programmable Motion Controller (PMC), programmed for:
    • format storage, up to 100 label formats
    • I/O ports
    • shift register for product detecting
    • product counter
  • Setting of:
    • label dispensing speed (up to 25Mt/min depending on label width)
    • label offset
    • label delay
  • Servo motor driven top down mounted label head
  • Wind up/down, in/out label head adjustment
  • Product split belt conveyor
  • Two side gripper belt modules
  • Top & side vacuum modules
  • Air assist module
  • Sweeper tamp module motorised drive (D Wrap model only)
  • Start/stop and emergency shut off button
  • 240AC, tri phase motor driven product conveyor
  • Base structure of stainless steel
  • Stainless steel equipment cabinets
  • Height adjustable screw jacks fitted
  • Stainless steel panels


  • Product spacer to create an even space between containers
  • Thermal printer to overprint barcodes, human readable information, "use by" and "batch" details on labels
  • Low label roll detection with alarm
  • Label dispensing speed (up to 40Mt/min or 80Mt/min depending on label width)
  • Zero downtime label roll change
  • Digital adjustment indicators
  • Clear label sensor (or clear labels with metallic foil)
  • Barcode scanner
  • Print verification
  • Web break alarm
  • Machine operating status light tower
  • Additional conveyor length in 1.0 meter sections
  • Partial guarding or fully interlocked guarding
  • Other options are available on request


  • Power supply: single phase 240 Vac 50Hz 10 Amp
  • Air Supply: 6 bar/90psi (maximum) dry uncontaminated, continuous air supply
  • Conveyor Height: 900mm +/- 50mm
  • Conveyor Length: 2400mm
  • Conveyor Width: 200mm (options 250mm)
  • Conveyor Speed: 20Mt/min
  • Label Head Height: 200mm (options 265mm)
  • Label Placement Accuracy: +/- 1mm (subject to any container tolerance variations)
  • Maximum Diameter Label Roll - 300mm (options 400mm or 500mm)
  • Maximum Label Core Size: 76mm
  • Minimum Label Core Size: 32mm
  • Maximum Product Width: up to 200mm depending conveyor selection width
  • Minimum Product Width: 100mm
  • Machine Weight: Approximately 285kg (standard machine without options)